Canada

Other Sites in English

NX500 iPhone 4 Bluetooth Update

Please follow these steps to update your NX500. This update will allow the iPhone 4 to operate correctly while using Bluetooth.

Please use a blank USB Jump Drive that has no content and is formatted in FAT or FAT32.

Step 1:

Please download the NX500 Update from www.clarion.com and save onto your Windows PC Desktop.

■Update tool for NX500

(Clarion_NX500_WinCE_V2.88.0_0141_110212.rar:3.85MB)

 

Note: It will be downloaded as a RAR (ZIP) File that contains the folder necessary for this update.

Step 2:

After you have downloaded the update file. Un-Zip the file into a separate folder onto your desktop.

Step 3:

Insert you blank USB Jump Drive into a USB Port on your computer. Notice the Drive that the USB Jump Drive is labeled.

Example: USB Mass Storage Device (F:)

Step 4:

Copy the Un-Zipped Folder that contains the update to the USB Jump Drive.

Step 5:

After the transfer is completed, you may now eject the USB Jump Drive from the USB Port on your computer.

Note: To correctly Eject the USB Jump Drive from your computer, please do the following.

Step A:

Left Click One Time on this Logo located in your System Tray (Bottom Right Corner).

<b>Step A:</b>
Left Click One Time on this Logo located in your System Tray (Bottom Right Corner).

Step B:

Left Click on the Drive Letter that is associated with the USB Jump Drive.

<b>Step B:</b>
Left Click on the Drive Letter that is associated with the USB Jump Drive.

Step C:

When prompted that your USB Mass Storage Device is Safe to Remove, Please remove the USB Jump Drive from your computer.

<b>Step C:</b>
When prompted that your USB Mass Storage Device is Safe to Remove, Please remove the USB Jump Drive from your computer.

Step 6:

Connect the USB Jump Drive that contains the update into the USB Pigtail located on the back of the NX500.

<b>Step 6:</b>
Connect the USB Jump Drive that contains the update into the USB Pigtail located on the back of the NX500.

Step 7:

Touch the Setup Icon from the Main Menu Screen.

<b>Step 7:</b>
Touch the Setup Icon from the Main Menu Screen.

Step 8:

Select the MISC Option that is located on the Left Side of the screen.

<b>Step 8:</b>
Select the MISC Option that is located on the Left Side of the screen.

Step 9:

Select the Set Password Option.

<b>Step 9:</b>
Select the Set Password Option.

Step 10:

When the Keypad appears, Enter in this code: 200802

<b>Step 10:</b>
When the Keypad appears, Enter in this code: <b>200802</b>

Step 11:

After entering the code, Select the Software Update Option.

<b>Step 11:</b>
After entering the code, Select the Software Update Option.

Step 12:

Select the YES Option on the Right Side of the Screen.

<b>Step 12:</b>
Select the YES Option on the Right Side of the Screen.

Step 13:

Select YES to Software Update when prompted.

<b>Step 13:</b>
Select YES to Software Update when prompted.

Step 14:

When you are asked to start the update, Select YES.

<b>Step 14:</b>
When you are asked to start the update, Select YES.

Step 15:

Now that the update has started, it is very important that the power to the NX500 is not shut Off or any buttons on the NX500 or the IR Wireless Remote are touched or pressed during this update process.

WAIT UNTIL THE UPDATE PROCESS IS COMPLETED!!

<b>Step 15:</b>
Now that the update has started, it is very important that the power to the NX500 is not shut Off or any buttons on the NX500 or the IR Wireless Remote are touched or pressed during this update process.
<b>WAIT UNTIL THE UPDATE PROCESS IS COMPLETED!!</b>

Step 16:

When the update is completed you will be asked to restart the NX500.

<b>Step 16:</b>
When the update is completed you will be asked to restart the NX500.

Return to the top of the page