Canada

Other Sites in English

NX602 Firmware/Software Update

NX602 Update Improved Functions

New as of Jan 21, 2014

You will need a minimum 256MB microSD card and a minimum 128MB USB stick. Larger capacities are acceptable. DO NOT USE the microSD card from your NX602.

The Download listed below has 3 zipped files in it (NX602.zip, NX602_mpeg.zip and NX602_OS.zip) for the 3 different updates to be done.

A1- Download the update and unzip to see 3 separate folders:

MPC_MCU_BT

MPEG

OS

NX602_update.zip (134 mb)

 

NX602 MPC, MCU & BT Update Procedure

A2- Start with the MPC_MCU_BT

A3- Copy the contents of the “MPC_MCU_BT” folder ( bootloader.bin, BT.bin, BTVer.bin, flasher.bin, MCU.bin, updater.bin and the folder CE69) to the root of a blank microSD card.

A2- Start with the MPC_MCU_BT

A3- Copy the contents of the “MPC_MCU_BT”  folder ( bootloader.bin, BT.bin, BTVer.bin, flasher.bin, MCU.bin, updater.bin and the folder CE69) to the root of a blank microSD card.

A4- Safely eject the microSD card from your computer.

A5- Remove the microSD Map card from the NX602 and store in a safe location. DO NOT PUT THIS CARD IN YOUR COMPUTER. DO NOT ALTER ANY FILES. DO NOT USE THIS CARD TO DO THIS UPDATE. Damage to this card is not covered under warranty.

A6- Insert the new microSD card into the slot. Gold contacts should face left.

A7- Turn on the source unit and let it finish booting.

A8- Go to the settings menu.

A8- Go to the settings menu.

A9- Scroll down and select Version.

A9- Scroll down and select Version.

A10- Press update.

A10- Press update.

A11- Press the red arrow to the right of the MPU update. If this is grey, go to step A15.

A11- Press the red arrow to the right of the MPU update. If this is grey, go to step A15.

A12- Press the right arrow.

You will see a message stating Upgrading, MPU V1.21

Once complete, the unit will automatically restart.

A12- Press the right arrow.
You will see a message stating Upgrading, MPU V1.21
Once complete, the unit will automatically restart.

A13- Once the unit has finished booting, Go to the settings menu.

A13- Once the unit has finished booting, Go to the settings menu.

A14- Scroll down and select Version.

A14- Scroll down and select Version.

A15- Press update.

A15- Press update.

A16- Press the red arrow to the right of the MCU update. If this is grey, go to step #A21.

A16- Press the red arrow to the right of the MCU update. If this is grey, go to step #A21.

A17- Press the right arrow.

You will see a message stating Upgrading MCU

Once complete, the unit will automatically restart.

A17- Press the right arrow.
You will see a message stating Upgrading MCU
Once complete, the unit will automatically restart.

A18- Once the unit has finished booting, Go to the settings menu.

A18- Once the unit has finished booting, Go to the settings menu.

A19- Scroll down and select Version.

A19- Scroll down and select Version.

A20- Press update.

A20- Press update.

A21- Press the red arrow to the right of the BT update. If this is grey, go to step A22.2

A21- Press the red arrow to the right of the BT update. If this is grey, go to step A22.2

A22.1- Press the right arrow.

You will see a message stating Upgrading, BT HW05-SW01.57.00

This update goes through the progress bar twice and takes several minutes. Please be patient.

A22.2-Once it restarts and finishes booting, please turn the radio off.

A22.3-Delete and repair all phones saved to the NX602.

A22.1- Press the right arrow.
You will see a message stating Upgrading, BT HW05-SW01.57.00
This update goes through the progress bar twice and takes several minutes. Please be patient.

A22.2-Once it restarts and finishes booting, please turn the radio off.

A22.3-Delete and repair all phones saved to the NX602.

A23- Remove the microSD card with the updates.

A24- Re-insert the navigation microSD card.

A25- Go to the settings menu

A25- Scroll down and select Version

Confirm that the unit is updated to the following version numbers:

Bluetooth : HW05-SW01.57.00

Application : 1.07.1.31 2013-10-12

MCU : V2.38 Jul 18 2013

If the software versions match, please proceed to page 2 for the MPEG and OS Updates.

Important: If the software versions on your unit matches the ones listed above then your update has been successfully completed. If any of the software versions do not match, please perform the software update again. After the “NX602 MPU, MCU, and BT Update” has been successfully completed the “NX602 OS Update” must be performed immediately, otherwise the unit will not operate properly.

Return to the top of the page