Installing in Your Vehicle

Title

Mount this In-Car Device on a flat, smooth surface, such as on the windshield.

CAUTION

  • Install the unit in a location where it will not interfere with vehicle operation or air bag deployment and will not block the driver's field of vision.
  • Vibration may cause it to fall off, so mount it in a safe place.
  • Make absolutely sure that the stand and display are securely mounted to your vehicle before driving it.
  • Be sure to unplug the car charger from the vehicle's power socket before mounting or removing the display from the vehicle.
  • If the In-Car Device is on and something, such as a piece of metal, touches the electrodes of the cradle and the display, it may short out the In-Car Devices.
  • If the device is used in a region where mounting it on the windshield is prohibited by law or regulation, use a dashboard mount (for devices over 80 mm dia./3.2 inch), which is sold separately.

1.Wipe the area for mounting the In-Car Device clean of any oil or other foreign matter.

2.Connect the 12 volt power adaptor [1],connection cable [2] and external microphone(sold separately) [3] in that order.

1.Wipe the area for mounting the In-Car Device clean of any oil or other foreign matter.
2.Connect the 12 volt power adaptor [1],connection cable [2] and external microphone(sold separately) [3] in that order.

3.Mount the cradle on its stand.

3.Mount the cradle on its stand.

4.Mount the stand to the windshield.

*Make sure the stand's suction pad stickssecurely to the surface.

4.Mount the stand to the windshield.
*Make sure the stand's suction pad stickssecurely to the surface.

5.Mount the display in the cradle.

*Align the terminals on the rear of the displayto those of the cradle and mount thedisplay.

5.Mount the display in the cradle.
*Align the terminals on the rear of the displayto those of the cradle and mount thedisplay.

6.If your audio system has an audio input,connect the audio OUT mini-jack of the connection cable to the vehicle's audio system and set the audio output to the external output on the settings screen of the device.

7.Connect the external microphone (sold separately).

Return to the top of the page