Mounting in the Cradle

Title

Mounting in the Cradle

Take the following steps.

1.Line up the holes under the display and the part sticking out from the cradle and press the display onto the cradle.

2.Make sure the terminals of the display and the cradle are lined up and press in.

*Slowly press down on frame of thedisplay, not on the screen.

*It makes a catching sound when mountedcorrectly.

NOTE

*Using excessive force may damage the terminals.

*If you feel even a little resistance, stop pressing and make sure the terminals, groove, etc., are lined up.

1.Line up the holes under the display and the part sticking out from the cradle and press the display onto the cradle.
2.Make sure the terminals of the display and the cradle are lined up and press in.
*Slowly press down on frame of thedisplay, not on the screen.
*It makes a catching sound when mountedcorrectly.
<b>NOTE</b>
*Using excessive force may damage the terminals.
*If you feel even a little resistance, stop pressing and make sure the terminals, groove, etc., are lined up.

Turning the Power ON

This is the procedure for turning the power on after you have finished positioning the stand and cradle and making initial settings, such as for Bluetooth.

1.Set the display in its cradle.

2.Start the vehicle's engine.

3.Connect the car charger to thevehicle's power socket.

4.Press the button briefly to turn the power on.

5.Release lock(s) of your iPhone.

6.Launch the Smart Access app on your iPhone.

7.Connect the iPhone to the In-Car Device with the connection cable.

1.Set the display in its cradle.
2.Start the vehicle's engine.
3.Connect the car charger to thevehicle's power socket.
4.Press the <img src= button briefly to turn the power on. 5.Release lock(s) of your iPhone. 6.Launch the Smart Access app on your iPhone. 7.Connect the iPhone to the In-Car Device with the connection cable." border="0" />

CAUTION

If you mount/dismount the display in the cradle when it is on, it may be damaged.

NOTE

*If it is not used for a long time and the battery is discharging, it may take some time to start up.

*If more than one iPhone has been registered with the In-Car Device, it searches initially for the iPhone it was last connected with. See the "Connecting via Bluetooth" to select the iPhone you wish to connect to.

Removing from the Cradle

When leaving your car, do not leave the display in the car; take it out of the cradle and take it with you or keep it inside the glovebox.

1.Press the button for more than two seconds to turn off the in-vehicle device.

2.Turn off the vehicle's engine.

3.Unplug the car charger from vehicle's power socket.

4.Press the cradle's Release button. Take the display out of the cradle.

1.Press the <img src= button for more than two seconds to turn off the in-vehicle device. 2.Turn off the vehicle's engine. 3.Unplug the car charger from vehicle's power socket. 4.Press the cradle's Release button. Take the display out of the cradle." border="0" />

Return to the top of the page