Mexico & Latin America

Other Sites in English

NX500 / NZ500 Update

Please follow these steps to update your NX500 / NZ500. This update will allow the iPhone 4 to operate correctly while using Bluetooth.

Please use a blank USB Jump Drive that has no content and is formatted in FAT or FAT32.

Step 1:

Please download the NX500 / NZ500 Update from www.clarion.com and save onto your Windows PC Desktop.

■Update tool for NX500

(Clarion_NX500_WinCE_V2.88.0_0141_110212.rar:3.85MB)

 

■Update tool for NZ500

(Clarion_NZ500_WinCE_V2.88.0_0132_110212.rar:4.28MB)

 

Note: It will be downloaded as a RAR (ZIP) File that contains the folder necessary for this update.

Step 2:

After you have downloaded the update file. Un-Zip the file into a separate folder onto your desktop.

Step 3:

Insert you blank USB Jump Drive into a USB Port on your computer. Notice the Drive that the USB Jump Drive is labeled.

Example: USB Mass Storage Device (F:)

Step 4:

Copy the Un-Zipped Folder that contains the update to the USB Jump Drive.

Step 5:

After the transfer is completed, you may now eject the USB Jump Drive from the USB Port on your computer.

Note: To correctly Eject the USB Jump Drive from your computer, please do the following.

Step A:

Left Click One Time on this Logo located in your System Tray (Bottom Right Corner).

<b>Step A:</b>
Left Click One Time on this Logo located in your System Tray (Bottom Right Corner).

Step B:

Left Click on the Drive Letter that is associated with the USB Jump Drive.

<b>Step B:</b>
Left Click on the Drive Letter that is associated with the USB Jump Drive.

Step C:

When prompted that your USB Mass Storage Device is Safe to Remove, Please remove the USB Jump Drive from your computer.

<b>Step C:</b>
When prompted that your USB Mass Storage Device is Safe to Remove, Please remove the USB Jump Drive from your computer.

Step 6:

Connect the USB Jump Drive that contains the update into the USB Pigtail located on the back of the NX500 / NZ500.

<b>Step 6:</b>
Connect the USB Jump Drive that contains the update into the USB Pigtail located on the back of the NX500 / NZ500.

Step 7:

Touch the Setup Icon from the Main Menu Screen.

<b>Step 7:</b>
Touch the Setup Icon from the Main Menu Screen.

Step 8:

Select the MISC Option that is located on the Left Side of the screen.

<b>Step 8:</b>
Select the MISC Option that is located on the Left Side of the screen.

Step 9:

Select the Set Password Option.

<b>Step 9:</b>
Select the Set Password Option.

Step 10:

When the Keypad appears, Enter in this code: 200802

<b>Step 10:</b>
When the Keypad appears, Enter in this code: <b>200802</b>

Step 11:

After entering the code, Select the Software Update Option.

<b>Step 11:</b>
After entering the code, Select the Software Update Option.

Step 12:

Select the YES Option on the Right Side of the Screen.

<b>Step 12:</b>
Select the YES Option on the Right Side of the Screen.

Step 13:

Select YES to Software Update when prompted.

<b>Step 13:</b>
Select YES to Software Update when prompted.

Step 14:

When you are asked to start the update, Select YES.

<b>Step 14:</b>
When you are asked to start the update, Select YES.

Step 15:

Now that the update has started, it is very important that the power to the NX500 / NZ500 is not shut Off or any buttons on the NX500 / NZ500 or the IR Wireless Remote are touched or pressed during this update process.

WAIT UNTIL THE UPDATE PROCESS IS COMPLETED!!

<b>Step 15:</b>
Now that the update has started, it is very important that the power to the NX500 / NZ500 is not shut Off or any buttons on the NX500 / NZ500 or the IR Wireless Remote are touched or pressed during this update process.
<b>WAIT UNTIL THE UPDATE PROCESS IS COMPLETED!!</b>

Step 16:

When the update is completed you will be asked to restart the NX500 / NZ500.

<b>Step 16:</b>
When the update is completed you will be asked to restart the NX500 / NZ500.

Return to the top of the page