NX404 Software Update Instructions (for MPEG)
NX404 Improvements (08/06/2014)
• Beginning of CD song
Estimated Update Time: 10 minutes
Introduction
Please download and print this NX404 Software Update procedure prior to downloading and installing this software update. It is important that this procedure is done in the order described in this document as failure to do so may result in the NX404 becoming inoperable.
Please confirm the software version of your unit prior to performing the update. Refer to step “3. Confirm Result” at the end of this document. If the software version on your device matches the versions listed in step “3. Confirm Result”, then your NX404 is up to date and you do not need to perform the software update.
Warning: Do not perform this software update while operating the vehicle. Do not interrupt the power of the NX404 while the update is in progress. Remember to record all the “Settings” prior to performing the update process, as the unit will return to factory default settings after the update.
Requirements
• A Windows PC with an internet connection and a Zip/Unzip program installed into it. (http://winzip.com/downwz.htm).
• A blank CD-R disc with 700MByte.
• A CD or DVD writer for your PC.
1. Preparation
1) Download the “NX404_MPEG.zip” file and save it to your computers desktop.
The files are zip-compressed and you will need to unzip them onto your PC prior to copying the files to the blank CD-R disc.
NX404_MPEG.zip (About 1.41MByte)
When the file is unzipped, you will see three files.
build.img
C9SL.BIN
update.ver
2. Update
1) Copy three files listed below to the root of CD-R disc
2) Insert the CD-R disc into the disc slot on the NX404.
3) Touch the "START" button.
4) Eject the disc when the state of update becomes "100%".
Note: Do not unplug, disconnect or power off the NX404 until the update has been completed. This portion of the update will take about five minutes to complete.
5) Power off the NX404.
3. Confirm Result
1) Press the “MENU” button that is located on the horizonal left of the front panel.
2) Touch the “Settings” button.
3) Scroll to the end of the “General” tab list.
4) Touch the "Set" button of the "Version" item.
5) Confirm that the following software versions have been successfully updated.
MPEG_V 0.00.05_0F23_140526
SEV_V 01.8B.37
Important: If the software versions on your unit matches the ones listed above then your update has been successfully completed. If any of the software versions do not match, please perform the software update again.
Support / Contact Information
In the event you have any difficulties executing these instructions and/or need assistance, contact Clarion
Customer Service at (800)347-8667, option #2 (Monday-Friday, 7:00AM-5:00PM PST).
