Full Digital Sound Processor (Sound Processor/Tweeter /Commander)
Z3
Discontinued
Sound processor
Analogue output | 4Vrms (VOL 0db) |
---|---|
S/N | 110dB (A filter) |
Harmonic Distortion | 0.01% |
Analogue input | RCA input, Speaker level input |
Input sensitivity
|
Low: RCA-in=4Vrms/power-in=8Vrms |
Mid: RCA-in=2Vrms/power-in=4Vrms | |
High: RCA-in=1Vrms/power-in=2Vrms | |
Digital coaxial input | 0.5Vp-p/75Ω, Up to 96kHz/24Bit/PCM |
Digital optical input | Up to 96kHz/24Bit/PCM |
Power Supply | 10.8 ~15.6V DC, Negative ground |
Current Consumption | Maximum 15A |
Weight | 660g |
Dimensions | 180(W)×37(H)×116(D)mm |
Commander (Supplied with Z3)
Weight | 385g |
---|---|
Dimensions | 100(W)×27(H)×46(D)mm |
Tweeter (Supplied with Z3)
< Driving section > | |
---|---|
Maximum output | 9W (4.5W × 2 Driver)× 2ch |
Rated output | 6W(3W × 2 Driver)× 2ch at 1% THD+N |
<Speaker section> | |
Impedance | 6Ω × 2ch |
Frequency response | 1.5kHz ~ 40kHz |
Weight (One speaker) | 77g |
Dimensions | 40(W)×40(H)×21.5(D)mm |
Commander (Supplied with Z3) Operation command list
Settings | Adjustment method | |||
---|---|---|---|---|
Commander | Tuning application | |||
Main VOL | -99dB ~ 0dB( 1dB step) | ○ | - | |
SW VOL | -10dB ~ +10dB( 0.5dB step) | ○ | - | |
Memory select | Custom memory 1 / Custom memory 2 /
Custom memory 3 / Custom memory 4(4 Patterns) |
○ | ○ | |
Intelligent
Tune |
Sound Restorer | OFF / Low / Mid / High | ○ | ○ |
Virtual Bass | OFF / Low / Mid / High | ○ | ○ | |
Tone Filter | Vivid +2 / Vivid +1 / OFF / Vintage +1 / Vintage +2 | ○ | ○ | |
Reverb Control | OFF / Low / Mid / High | ○ | ○ | |
Balance | Left 12 ~ Center ~ Right 12 | ○ | - | |
Fader | Rear 12 ~ Center ~ Front 12 | ○ | - | |
Source (Input setting) | Digital optical / Digital coaxial / Analog / USB | ○ | - | |
Audio Sense | Low / Mid / High | ○ | - | |
Brightness | OFF / Level 1 ~ 10 | ○ | - | |
Beep | ON / OFF | ○ | - |
Main supplied items
- Sound Processor
- Commander (2.46m)
- Tweeter kit
- Power cable (2.5m) * Grounding cord (2m)
- Speaker input cable (2m)
- USB cable A (0.5m)
- USB cable B (0.15m)
< Tweeter kit >
- Tweeter × 2
- Mount adapter × 2
- Flush-mount spacer × 2
- Lever arm × 2
- Z3 output cord (0.3m)
- Extension cord (3m) × 2